Labtron

At Labtron, we supply Specific Gravity Tester LSGT-A10 having a Vessel Volume of 4000 ml × 2, Power of Vacuum pump of 160 W, Power of shaking machine of 30 W, etc.

Medical Autoclave LMA-A10 is a class B fractionated automated autoclave. Inbuilt with 8 types of sterilization systems and two test program that can be checked and monitored by computer. It has automatic power shut down for overheating of inner temperature and an alarm system to indicate low water level. Automatic power and water cut off with an alarming indicator when there is lack of water makes this autoclave safe and reliable to use.

Portable Conductivity Meter LPCM-A13 is adapted with different modes for measuring quality of water on parameters such as conductivity, total dissolved solids, salinity, resistivity and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.

Test Sieve Shaker LLTS-A10 features 1 to 8 sieve working layers which rotates at speed of 1400 rpm for fine particle distribution analysis. With diameter of 200 mm sieve, it can test 50 to 150 g of sample material. Used to determine particle size distribution of raw and finished materials in the form of particles, powder and liquid.

Preparative HPLC-676 is equipped with 4 pump head variation and a UV or RI detector with a wavelength range of 190 to 400 nm and 400 to 800 nm. Built in multi positioned fraction valve and controlled fractionation optimizes controlled fraction collection and solvent recycling. With a column size of 10 x 1000 mm the retention, resolution and selectivity is optimized.

Rotary Evaporator LRE-B10 comes with hand lift for manual ascending and descending lifting of water bath. Its vertical one piece condenser, collection flasks, rotary flask made up of borosilicate glass ensures high durability. With 1000 cm2 optimized bath volume, high vacuum degree, evaporation rate, recovery rate this rotary evaporate delivers highly accurate distillation results.

Air cooled chillers are energy saving and highly efficient chillers. In the case of emergency situations, there is provision to cut off main power immediately. These chillers give stable performance and are leakage proof. These air cooled chillers comes in wide range of compressors from 3.3 kW to 22.5 kW for use. They are completely safe device and are compact in structure for outdoor installation.

Polorimeteter LPMR-A10 is an optical instruments which comes with 589nm standard sodium lamp and (-180) °C to 180 °C measurement range for determining the concentration of the optical active substance, dissolved in an optically inactive liquid. The angle of rotation to be measured depends on the nature of the test sample, the concentration of the optically active components, wavelength of light, temperature of the test sample & optical path length.

Manual Polarimeter LPMR-B10 with LED display, has ± 45° scope of measurement. Equipped with optical rotation, it determines concentration, content, purity of a substance. Long-life LED with 589 nm filter works as light source.

Fiber Analyzer LFBA-A10 is designed with hidden solution, advance barrel pull structure to facilitates dosing operation, provide flexible, and safe fiber analysis. Advanced integrated infrared heating technology offers fast uniform heating of the crucible, more consistent sample extraction, higher extraction recovery, improved accurate test results. The crucible recoil function designed to prevent sample in the crucible cannot caking filtration. It can analyse crude fiber and Van Soest analysis to wash the fiber.

Microwave Digestion System LMWD-B11 is newly designed and fully upgraded with higher performance and safer protection system. Vessel quantity of 10 and vertical design for even distribution of microwave with multi safety protection functions. Equipped with contactless sensor monitoring with no burst disk design saves consumables cost and maintenance cost. Designed with 7 inch color touch screen with user-friendly interface for easy operation. Material used TFM material for inner vessel and PEEK glass material for outer vessel prevents corrosion. Offers free temperature and pressure measuremen

Platelet Agitator LPTA-A10 is an open continuous side-to-side motion agitation system with storage capacity up to 30 apheresis bags. The shelves are constructed in stainless steel, favourable for easy sliding, mounting and dismounting. Specialized motor assembly allows shelf platform to produce smooth strokes reducing squeaks and noise. One-piece perforated drawers with non-slip textured coating provide uniform air circulation and dissipates heat to maintain RTP conditions.

Automatic Potentiometric Titrator LPTT-A11 is equipped with burette valve integrated design, to avoid mutual interference of different titrimetric solutions. Built in with large and bright LCD screen display. During operation, stirring system is adopted for adjusting the stirring speed. Microprocessor controlled system automatic potentiometric titrator is designed to make performing titrations easier, more reproducible and more reliable than manual titrations. It performs automatic identification of pH standard solutions, also supports manual identification.

Fully-automatic Kjeldahl Analyzer LKA-C10 conducts titration and distillation simultaneously so as to neutralize the ammonia gas released which enhance the test efficiency and avoid the overflow of ammonia. It stand with a measuring range from 0.1 to 200 mgN which gives a maximum recovery of ≥ 99.5 %. The operating ambient temperature of the device starts from 10 °C to 35 °C. 8.0-inch LCD touch screen is used to set the distillation time, the amount of diluent, acid liquor and alkali. Diaphragm pump is used to add reagent so that the injure caused by high pressure pump can be neglected. Wirel

Type III Water Purification System LHWP-A13 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Digital differential pressure meter LDPM-A10 is a handheld microprocessor based unit. It shows the differential pressure between indoor and outdoor, clean room and unclean room. It adopts imported differential pressure transmitter along with the advanced design of circuitry and structure. Recorded data can conveniently be stored, viewed and printed using an external printer.

Automatic Microtome LAM-A10 is a fully automated microtome, offers adjustable speed with three sectioning modes (Continuous, Step, Single) for users selection. Designed with streamlined molded housing, hand wheel for smooth running and stepping-motor advance technology for fine sectioning and trimming of specimen with selectable specimen retraction. Features, a precise micro motion specimen feeding system, microcomputer controlled optical signal and stepper motor to regulate specimen feeding, and a removable waste tray for specimen dismantling. Automatic Microtome offers, 0.5 μm to 100 μm sec

The rotational Viscometer LVM-C10 with stylish and modern technology, measures viscosity very quickly and accurately. It does measure & save 30 pcs test data. It is used in any area that requires the study of flow of liquid properties. They are handheld, user-friendly, and portable in nature.

Flake ice makers have stainless steel material robust construction and sleek and stylish design. These flake ice makers have user friendly electronic controls and indicator system to indicate the water and ice level. It produces Steady shape ice with high transparency. They are durable, energy efficient and can be used for a variety of applications. These flake ice maker rapidly produces ice flakes that compactly surround the product and cools it very fast.

Haze meter LHM-A10 is used for haze and transmittance measurement. It has open measurement area with no limit on sample size, can carry out vertical measurements as well. It comes with different light sources such as A, C, D65 etc. for haze, transmittance measurement. Design confirms to ASTM & ISO standards, where transmittance compensation measurement provides high accuracy test result.